• Connection system for solvent weld, threaded and flanged joints
• Compact and lightweight construction
• High flow coefficient and minimum pressure drop
• Internal components in metal totally isolated from the conveyed fluid, with anti-friction disk to reduce friction to a minimum
• Modularity of the range: only 5 diaphragm and bonnet sizes for 9 different valve sizes
• Handwheel that stays at the same height during rotation
• Bonnet fastening screws that screw into the built-in bush preventing the deposit of dirt or impurities
• CDSA system (Circular Diaphragm Sealing Angle) used up to DN50, offering the following advantages:
- uniform distribution of shutter pressure on the diaphragm
- reduction in the tightening torque of the screws fixing the actuator to the valve body
- reduced mechanical stress on all valve components (actuator, body and diaphragm)
- easy to clean valve interior
- low risk of the accumulation of deposits, contamination or damage to the diaphragm due to crystallisation
- operating torque reduction
• Compact and lightweight construction
• High flow coefficient and minimum pressure drop
• Internal components in metal totally isolated from the conveyed fluid, with anti-friction disk to reduce friction to a minimum
• Modularity of the range: only 5 diaphragm and bonnet sizes for 9 different valve sizes
• Handwheel that stays at the same height during rotation
• Bonnet fastening screws that screw into the built-in bush preventing the deposit of dirt or impurities
• CDSA system (Circular Diaphragm Sealing Angle) used up to DN50, offering the following advantages:
- uniform distribution of shutter pressure on the diaphragm
- reduction in the tightening torque of the screws fixing the actuator to the valve body
- reduced mechanical stress on all valve components (actuator, body and diaphragm)
- easy to clean valve interior
- low risk of the accumulation of deposits, contamination or damage to the diaphragm due to crystallisation
- operating torque reduction
MAIN FEATURES:
- Handwheel in PP-GR with high mechanical strength and ergonomic grip for optimum manageability
- Optical position indicator supplied as standard
- Full protection bonnet in PP-GR, no protruding bolts, no areas where impurities can accumulate. Internal circular and symmetrical diaphragm sealing area
- Diaphragm available in EPDM, FPM, PTFE (NBR on request) and easy to replace
- Threaded metal inserts for anchoring the valve
- Hãy liên hệ để được sự tư vấn tốt nhất:NHÀ PHÂN PHỐI CHÍNH THỨC TẠI THỊ TRƯỜNG VIỆT NAMVINH AN ITS CO., LTDMobile: 0919791618/ 0906719902Email: sales@vinhanco.vnWebsite: http://vinhanco.vn/
Không có nhận xét nào:
Đăng nhận xét